Steering Wheel Control

• The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone
• style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio
• labeled W/R, REM, Wired Remote, Remote, Rem Cont etc.). If the radio does not have a
• wired remote input then you will
• need to use the SWI-X.
• Clarion model CZ500 does not support remote Bluetooth controls
• JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up
• and Down from steering wheel controls
• Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands.
• This is a limitation of the radio not the SWI-RC. There is no correction for
• this unless it comes from Pioneer.
• Pioneer radios with Bluetooth feature, the steering wheel controls will not
• adjust the phone call volume.  The phone call volume must be adjusted on
• the face of the radio.  This is a limitation of the radio not the SWI-RC.
• There is no correction for this unless it comes from Pioneer.
• Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH and the AVIC-X920BT,
• X930BT, X940BT will support the Voice Recognition function via
• wired remote input.

Current Revision #:  1.4.5        Description: Adds 4 new functions for Kenwood:
Voice Dial, Mute, On hook and Off hook.  Adds Answer/End function for Sony.     
Date Released: 9-4-13

Revision #:  1.1b.4        Description: Adds support for Fusion radios
Date Released: 7-15-13

Revision #:  1.1b.3a        Description: Increased performance when using the Yellow
or Orange wire input.  Increased performance using white wire in version setting 9. 

Revision #:  1.1.2a           Description: Initial Release