Chrysler Dodge radio interface

Current Revision #: 1.1.7 Description: Fixes reverse output false triggering in vehicles equipped with manual transmission, fixes turn-on pop seen in vehicles equipped with a factory amplifier Release Date: 10-18-13

Revision #: 1.1.6a Description: Fixes reverse output false triggering & digital amp not turning on

Revision #: 1.1.6 Description: Fixes "No Signal" text on instrument cluster seen in 2012 vehicles

Revision #: 1.1.4a Description: Fixes issue with factory sub not turning on in Alpine system

Revision #: 1.1.4 Description: Adds factory VES retention and Voice Prompt & Phone SWC support

Revision #: 1.1.3 Description: Initial Release

• Does not retain uConnect
• In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo.
• Vehicles equipped with a factory Alpine system MUST use revision 1.1.4a or higher

• Keeps Data-Bus Intact for Vehicle Service & Emissions Testing
• Built in SWI-CAN
• Data controlled RAP accessory output wire
• Data controlled parking brake wire
• Data controlled reverse trigger
• Data controlled vehicle speed sense wire
• Data controlled illumination output
• Retains factory-installed amplified audio system

• Make	Model	Year
  Chrysler	200	2011-2012
  	300	2006-2010
  	Aspen	2007-2009
  	PT Cruiser	2007-2010
  	Sebring	2007-2010
  	Town & Country	2008-2012
  Dodge	Avenger	2007-2012
  	Caliber	2006-2012
  	Challenger	2008-2012
  	Charger	2006-2010
  	Dakota	2005-2011
  	Durango	2004-2012
  	Grand Caravan	2009-2012
  	Journey	2009-2010
  	Magnum	2005-2008
  	Nitro	2007-2011
  	Ram	2006-2011
  Jeep	Grand Cherokee	2005-2012
  	Liberty	2008-2012
  	Patriot	2007-2012
  	Wrangler	2007-2012
  Mitsubishi	Raider	2006-2009
  Volkswagen	Routan	2009-2012